video preview -
Translate:
Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial
Samsung Galaxy Tab 2 7.0 is expected to get the Android 4.1 Jelly Bean firmware update by Samsung, we will update you as soon as the firmware is released only for everyone to download.
Android 4.0.4 DDBLH3 Firmware Details:
PDA: P3100DDBLH3
CSC: P3100ODDBLH1
Version: 4.0.4
Date: 2012-08-27
Regions: India
Make sure you have installed all your USB drivers for the Samsung Galaxy S III to connect it with the computer. Download Samsung Galaxy Tab 2 (7.0) USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.
1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.
2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.
3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:
4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.
5. If your firmware is for the China region, do NOT install it on other Samsung devices bought from anywhere else other than China.
Now, let’s proceed with the tutorial on the next page and install DDBLH3 Android 4.0.4 firmware on Galaxy Tab 2 (7.0) P3100 to update to the latest Android release.
We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy S Tab 2 to Android 4.0.4 DDBLH3 ICS. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
To Remember:
Complete Step-By-Step Instructions:
Step 1 - Download Android 4.0.4 P3100DDBLH3 for Galaxy Tab 2 (7.0) to your computer and extract the zip file.
Step 2 - Download ODIN v1.85 which will help you to install Android 4.0.4 on Samsung Galaxy Tab 2 (7.0) P3100.
Step 3 - Switch off your phone. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy Tab 2 (7.0) USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S Tab 2 has now been updated to Android 4.0.4 build DDBLH3 software update. Go to Settings > About phone to verify.
Translate:
DDBLH3 Android 4.0.4 firmware update is the latest available for the galaxy Tab 2 7.0 P3100 in India. This firmware
fixes lots of bugs that we have seen in the past and is the most up to
date one available for the tablet. We strongly recommend that you update
to this firmware. For those unsure, P3100 is the WiFi + 3G variant of
the 7-inch Android tablet which was released a few months ago. You can
install Android 4.0.4 DDBLH3 on Galaxy Tab 2 (7.0) P3100 manually, using the tutorial given below. No root or ClockworkMod custom recovery required.
As you continue reading below, we will guide you through the entire process of how to install
the official software update Android 4.0.4 DDBLH3 ICS on Galaxy Tab 2
(7.0) P3100 using ODIN. Please make sure you backup all your apps and
personal data as a precaution. Let’s continue with the tutorial below.Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial
Samsung Galaxy Tab 2 7.0 is expected to get the Android 4.1 Jelly Bean firmware update by Samsung, we will update you as soon as the firmware is released only for everyone to download.
Android 4.0.4 DDBLH3 Firmware Details:
PDA: P3100DDBLH3
CSC: P3100ODDBLH1
Version: 4.0.4
Date: 2012-08-27
Regions: India
Make sure you have installed all your USB drivers for the Samsung Galaxy S III to connect it with the computer. Download Samsung Galaxy Tab 2 (7.0) USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.
1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.
2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.
3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Contacts, Gmail and Google Data. How? –> Sync with Google Sync.
- Backup Call History. How? –> How to Backup Call History.
- Backup WhatsApp Messages. How? –> How to Backup/Restore WhatsApp Messages.
- Backup APN Settings: GPRS, 3G, MMS Settings.
4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.
5. If your firmware is for the China region, do NOT install it on other Samsung devices bought from anywhere else other than China.
Now, let’s proceed with the tutorial on the next page and install DDBLH3 Android 4.0.4 firmware on Galaxy Tab 2 (7.0) P3100 to update to the latest Android release.
We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy S Tab 2 to Android 4.0.4 DDBLH3 ICS. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
To Remember:
- This Android 4.0.4 DDBLH3 firmware tutorial is only for Samsung Galaxy Tab 2 (7.0) P3100. Please don’t try this on any other variants of the phone.
- This tutorial will wipe out all your data.
- Make sure you backup all your data in your phone before proceeding.
Complete Step-By-Step Instructions:
Step 1 - Download Android 4.0.4 P3100DDBLH3 for Galaxy Tab 2 (7.0) to your computer and extract the zip file.
Step 2 - Download ODIN v1.85 which will help you to install Android 4.0.4 on Samsung Galaxy Tab 2 (7.0) P3100.
Step 3 - Switch off your phone. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy Tab 2 (7.0) USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
- Click on ‘PDA’ and select file with ‘CODE’ in its name.
- Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
- Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
- Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S Tab 2 has now been updated to Android 4.0.4 build DDBLH3 software update. Go to Settings > About phone to verify.